electric utility

Corrosion and Splices

By Waymon P. Goch Worldwide, the annual cost of corrosion is $2.2 trillion (US); and is currently estimated to be $429 billion (US) annually in the United States.(1) Corrosion that results in failure of aircraft, pipelines, bridges and other critical…


Inner Workings of an Automatic Splice and Using ClampStar as a Safety Tool

By, Carl R. Tamm ClampStar is used as a tool by several utilities as a “safety” when performing line work on a conductor that contains an automatic splice in the span. As a work method precaution, many utilities require the crew to install a “safety”…


DO YOU KNOW THE CONDITION OF YOUR SPLICES?

Joe Renowden, Consulting Engineer (Article provided by SensorLink) Why would that question be important when industry wide there have been relatively few failures? The answer is: The risk of failure can’t be managed until the splice’s condition is…


Do You Change the Tires on the Family Auto?

By, Carl Tamm Most of us gray haired guys well remember the advent of radial belted tires!  There was significant skepticism initially, as some of the early models wound up with bulging “pump knots” on the sidewalls, but eventually the problems were…


Fault Current versus Distance

Background: A major utility noted that they were having far more splice failures on their 34.5 kV distribution lines within a few miles of the substation than they were toward the end of their circuits. The primary reason is the available system fault…


The Truth About Infrared Inspections

Hangin’ Your Repairs on Temperature? By, Kimberly Lewis HOT/SHOT Infrared Inspections, Inc. Infrared technology has been heavily utilized by the utility industry for over 30 years and yet it is still vastly misunderstood.  In a perfect world,…


Connectors - The Weak Link

When considering increased conductor temperatures, numerous issues are of concern, particularly with the dynamic effects on electrical connectors when suspended overhead aluminum conductors are operated at high temperatures, specifically above 93°C…


Alabama Power Repairs Hot Splice In 8 Minutes and 23 seconds!

Following annual line surveys at Alabama Power, with the discovery of some hot (aged) splices found with IR Thermography, a decision was made to utilize the advantage of a helicopter to quickly and efficiently install ClampStar units over the hot splices…


SMUD Uses Helicopter to Install ClampStar Unit After IR Inspection Identifies Hot Splice

Jim Wilhelm, Tower Patrol T&D Assets, Distribution Services Lineman for Sacramento Municipal Utility District said “Installation was difficult due to the movement of the helicopter, but allowed us to do this over a deep gorge, not accessible from a…


New "CSS" Style ClampStar

Due to popular demand, CCI has developed the New “CSS” style ClampStar units for use on Deadends and Suspension Clamp applications!  Made with a single conductor leg, the new unit installs in minutes, the same as the traditional ClampStar units that are…