Articles

July 15, 2026

A research-based assessment: twenty years of ORNL research, CIGRE Technical Brochure 905, independent engineering analysis, and certified…

April 1, 2026

July 11, 2025

July 11, 2025

June 7, 2024

February 1, 2024

November 19, 2022

August 25, 2020

August 19, 2020

December 4, 2019

October 29, 2019

November 29, 2017

September 28, 2017

July 6, 2017

May 4, 2017

November 9, 2016

BODY SNATCHER GRIPPING TOOL KIT
Part Number	Description
IK-G001	Body Snatcher Gripping Tool Kit contains (1) carrying case, (2) Gripping Units & (2) IK-375G hot stick connection points

TORQUE NUTS
Part Number	Description	Wrenches
TNHH-500	Zinc housing over HDG Steel nut 1/2-13 thread, 40 ft-lb nominal	Install with 3/4″ socket Remove with 15/16″ deep-well socket
TNHH-500-55	Zinc housing over HDG Steel nut 1/2-13 thread, 55 ft-lb nominal
TNHH-500-SS	Zinc housing over Stainless Steel nut 1/2-13 thread, 40 ft-lb nominal
TNHH-500-BZ	Zinc housing over Stainless Steel nut 1/2-13 thread, 40 ft-lb nominal
TNHH-375	Zinc housing over HDG Steel nut 3/8-16 thread, 22 ft-lb nominal	Install with 9/16″ socket Remove with 3/4″ deep-well socket

INSTALLATION KIT
Part Number	Description
Installation Kit-375	3/8″ eye bolt
Installation Kit-500	1/2″ eye bolt
Installation Kit-EXT-625	5/8″ cable extension for OPGW/OHSW

Corona Shields
CSC-0883-230	Corona shields are generally required for applications above 138 kv. The appropriate shielding is obtained by combining the ClampStar unit number with the highest anticipated system voltage. Example: CSC-1108-230 designates shielding for corona free performance of CRU/CSF/CSR-1108 units installed on a 230 kv system. **Same shield is used for 230 and 345 KV applications
CSC-0883-345 **
CSC-1108-345 **
CSC-XXXX-500