over head conductor

Do You Change the Tires on the Family Auto?

By, Carl Tamm Most of us gray haired guys well remember the advent of radial belted tires! There was significant skepticism initially, as some of the early models wound up with bulging “pump knots” on the sidewalls, but eventually the problems were…

by CCostanzo

The Truth About Infrared Inspections

Hangin’ Your Repairs on Temperature? By, Kimberly Lewis HOT/SHOT Infrared Inspections, Inc. Infrared technology has been heavily utilized by the utility industry for over 30 years and yet it is still vastly misunderstood. In a perfect world,…

by CCostanzo

Connectors - The Weak Link

When considering increased conductor temperatures, numerous issues are of concern, particularly with the dynamic effects on electrical connectors when suspended overhead aluminum conductors are operated at high temperatures, specifically above 93°C…

by CCostanzo

Alabama Power Repairs Hot Splice In 8 Minutes and 23 seconds!

Following annual line surveys at Alabama Power, with the discovery of some hot (aged) splices found with IR Thermography, a decision was made to utilize the advantage of a helicopter to quickly and efficiently install ClampStar units over the hot splices…

by CCostanzo

SMUD Uses Helicopter to Install ClampStar Unit After IR Inspection Identifies Hot Splice

Jim Wilhelm, Tower Patrol T&D Assets, Distribution Services Lineman for Sacramento Municipal Utility District said “Installation was difficult due to the movement of the helicopter, but allowed us to do this over a deep gorge, not accessible from a…

by CCostanzo

New "CSS" Style ClampStar

Due to popular demand, CCI has developed the New “CSS” style ClampStar units for use on Deadends and Suspension Clamp applications! Made with a single conductor leg, the new unit installs in minutes, the same as the traditional ClampStar units that are…

by CCostanzo

ClampStar Part Number	Conductor Diameter Range			Number of Keepers Per Side	Average Weight		Overall Length
ClampStar Part Number	Conductor Range	Inches	mm	Number of Keepers Per Side	Pounds	Kg	Inches	cm
Rigid Frame
CSR-0325L-007-P***	#6 AWG – #2 AWG	0.162 – 0.325	4.1 – 8.3	1	1.7	.8	12.2	31.0
CSR-0325-015	#6 AWG – #2 AWG	0.162 – 0.325	4.1 – 8.3	2	3.5	1.6	26.38	67.0
CSR-0609-024	#2 AWG – 266.8 kcmil	0.316 – 0.609	8.0 – 15.5	2	7.7	3.5	43	109.2
CSR-0642L-024***	2/0 AWG – 266.8 kcmil	0.349 – 0.642	8.9 – 16.3	2	7.7	3.5	43	109.2
CSR-0642-024	2/0 AWG – 266.8 kcmil	0.349 – 0.642	8.9 – 16.3	3	14	6.4	52.8	134.1
CSR-0883L-024***	3/0 AWG – 477 kcmil	0.502 – 0.883	12.8 – 22.4	2	13.1	5.9	43.8	111.3
CSR-0883-036	3/0 AWG – 477 kcmil	0.502 – 0.883	12.8 – 22.4	3	19.1	8.7	65.4	166.1
CSR-1108L-024***	336.4 kcmil – 795 kcmil	0.684 – 1.108	17.4 – 28.1	2	14.4	6.5	43.8	111.3
CSR-1108-040	336.4 kcmil – 795 kcmil	0.684 – 1.108	17.4 – 28.1	4	27	12.2	78.8	200.2

ClampStar Part Number	Conductor Diameter Range			Number of Keepers Per Side	Average Weight		Overall Length
ClampStar Part Number	Conductor Range	Inches	mm	Number of Keepers Per Side	Pounds	Kg	Inches	cm
Rigid Frame
CSR-1140S-048	477 kcmil – 795 kcmil	0.814 – 1.140	20.7 – 29.0	16	31.9	14.5	92	233.7
CSR-1140FT-048	477 kcmil – 795 kcmil	0.814 – 1.140	20.7 – 29.0	20	36.3	16.5	100	254.0
CSR-1386S-060	605.0 kcmil – 1351.5 kcmil	1.051 – 1.386	26.7 – 35.2	16	33.8	15.3	104	264.2
CSR-1386H-060	605.0 kcmil – 1351.5 kcmil	1.051 – 1.386	26.7 – 35.2	20	38.7	17.6	112	284.5
CSR-1386FT-060	605.0 kcmil – 1351.5 kcmil	1.051 – 1.386	26.7 – 35.2	20	38.4	17.4	112	284.5
CSR-1631S-060	1272 kcmil – 1780 kcmil	1.345 – 1.631	34.2 – 41.4	20	37.9	17.2	112	284.5
CSR-1631H-060	1272 kcmil – 1780 kcmil	1.345 – 1.631	34.2 – 41.4	26	53	24.04	124	315.0
CSR-1631FT-060	1272 kcmil – 1780 kcmil	1.345 – 1.631	34.2 – 41.4	20	37.9	17.2	112	284.5
CSR-1912S-060	1351.5 kcmil – 2515 kcmil	1.524 – 1.912	38.7 – 48.6	20	50	22.7	112	284.5
CSR-1912H-060	1351.5 kcmil – 2515 kcmil	1.524 – 1.912	38.7 – 48.6	26	58.0	26.3	124	315.0
CSR-1912FT-060	1351.5 kcmil – 2515 kcmil	1.524 – 1.912	38.7 – 48.6	20	50.3	22.8	112	284.5

ClampStar Part Number	Conductor Diameter Range			Number of Keepers Per Side	Average Weight		Overall Length
ClampStar Part Number	Conductor Range	Inches	mm	Number of Keepers Per Side	Pounds	Kg	Inches	cm
CRU ♦
CRU-0642-014	2/0 AWG – 266.8 kcmil	0.349 – 0.642	8.9 – 16.3	3	3	1.4	14.4	36.6
CRU-0883-015	3/0 AWG – 477 kcmil	0.502 – 0.883	12.8– 22.4	3	7	3.2	14.7	37.3
CRU-1108-019	336.4 kcmil – 795 kcmil	0.684 – 1.108	17.4 – 28.1	4	12	5.4	19.4	49.3

Corona Shields
CSC-0883-230	Corona shields are generally required for applications above 138 kv. The appropriate shielding is obtained by combining the ClampStar unit number with the highest anticipated system voltage. Example: CSC-1108-230 designates shielding for corona free performance of CRU/CSF/CSR-1108 units installed on a 230 kv system. **Same shield is used for 230 and 345 KV applications
CSC-0883-345 **
CSC-1108-345 **
CSC-XXXX-500

ClampStar Part Number	Conductor Diameter Range			Number of Keepers Per Side	Average Weight		Overall Length
ClampStar Part Number	Conductor Range	Inches	mm	Number of Keepers Per Side	Pounds	Kg	Inches	cm
CSS-1140S-DE-060-X-X	477 kcmil – 795 kcmil	0.814 – 1.140	20.7 – 29.0	16/8	TBD	TBD	95	241.3
CSS-1140FT-DE-060-X-X	477 kcmil – 795 kcmil	0.814 – 1.140	20.7 – 29.0	20/8	43.8	19.9	99	251.5
CSS-1386S-DE-060-X-X	605.0 kcmil – 1351.5 kcmil	1.051 – 1.386	26.7 – 35.2	16/10	44.4	20.1	97	246.4
CSS-1386FT-DE-060-X-X	605.0 kcmil – 1351.5 kcmil	1.051 – 1.386	26.7 – 35.2	20/10	46.2	21.0	101	256.5
CSS-1631S-DE-060-X-X	1272 kcmil – 1780 kcmil	1.345 – 1.631	34.2 – 41.4	20/12	44	20.0	103	261.6
CSS-1631FT-DE-060-X-X	1272 kcmil – 1780 kcmil	1.345 – 1.631	34.2 – 41.4	20/12	46.5	21.1	103	261.6
CSS-1912S-DE-066-X	1351.5 kcmil – 2515 kcmil	1.524 – 1.912	38.7 – 48.6	20/12	62	28.1	109	276.9
CSS-1912FT-DE-066-X	1351.5 kcmil – 2515 kcmil	1.524 – 1.912	38.7 – 48.6	20/12	62	28.1	109	276.9

over head conductor

Explore

Contact

INSTALLATION KIT
Part Number	Description
Installation Kit-375	3/8″ eye bolt
Installation Kit-500	1/2″ eye bolt
Installation Kit-EXT-625	5/8″ cable extension for OPGW/OHSW

TORQUE NUTS
Part Number	Description	Wrenches
TNHH-500	Zinc housing over HDG Steel nut 1/2-13 thread, 40 ft-lb nominal	Install with 3/4″ socket Remove with 15/16″ deep-well socket
TNHH-500-55	Zinc housing over HDG Steel nut 1/2-13 thread, 55 ft-lb nominal
TNHH-500-SS	Zinc housing over Stainless Steel nut 1/2-13 thread, 40 ft-lb nominal
TNHH-500-BZ	Zinc housing over Stainless Steel nut 1/2-13 thread, 40 ft-lb nominal
TNHH-375	Zinc housing over HDG Steel nut 3/8-16 thread, 22 ft-lb nominal	Install with 9/16″ socket Remove with 3/4″ deep-well socket

Spline Bits
Part Number	Description
Installation Kit-T45	T45 Torque Spline Bit
Installation Kit-T60	T60 Torque Spline Bit