shunt

New "CSS" Style ClampStar

Due to popular demand, CCI has developed the New “CSS” style ClampStar units for use on Deadends and Suspension Clamp applications! Made with a single conductor leg, the new unit installs in minutes, the same as the traditional ClampStar units that are…

by CCostanzo

Line Crews Repair Failing Splices with No Power Interruption!

May 01, 2010, Transmission & Distribution World, By Mike Dario, Los Angeles Department of Water and Power Corrosive salt water and high winds in Los Angeles' beach areas were wreaking havoc on the Los Angeles Department of Water and Power's automatic…

by CCostanzo

Los Angeles Department of Water & Power corrects failing splices in record time!

On a recent Tuesday morning at 10:00, two linemen from LADWP, Mike Traweek and Sammy Sempelsz lifted off the ground in their new Altec bucket truck to begin the first round of ClampStar® installations. They completed the first 6 installations in 55…

by CCostanzo

Dominion VA Power installs ClampStar in Grandy, NC

The unit was installed on a 477 ASCR conductor, 34.5kV L-L, 19.9kV L-N, over an automatic splice. Including the time for set up, and covering/uncovering the adjacent conductors, the install took 25:19. Once the ClampStar® was loaded in the bucket, the…

by CCostanzo

Introducing ClampStar from Classic Connectors

There is a serious problem in the electric power utility industry that is getting worse every day. Almost half of the installed infrastructure has reached the end of its original design life. Because the assessment and replacement of these components is…

by CCostanzo

ClampStar Part Number	Conductor Diameter Range			Number of Keepers Per Side	Average Weight		Overall Length
ClampStar Part Number	Conductor Range	Inches	mm	Number of Keepers Per Side	Pounds	Kg	Inches	cm
Rigid Frame
CSR-0325L-007-P***	#6 AWG – #2 AWG	0.162 – 0.325	4.1 – 8.3	1	1.7	.8	12.2	31.0
CSR-0325-015	#6 AWG – #2 AWG	0.162 – 0.325	4.1 – 8.3	2	3.5	1.6	26.38	67.0
CSR-0609-024	#2 AWG – 266.8 kcmil	0.316 – 0.609	8.0 – 15.5	2	7.7	3.5	43	109.2
CSR-0642L-024***	2/0 AWG – 266.8 kcmil	0.349 – 0.642	8.9 – 16.3	2	7.7	3.5	43	109.2
CSR-0642-024	2/0 AWG – 266.8 kcmil	0.349 – 0.642	8.9 – 16.3	3	14	6.4	52.8	134.1
CSR-0883L-024***	3/0 AWG – 477 kcmil	0.502 – 0.883	12.8 – 22.4	2	13.1	5.9	43.8	111.3
CSR-0883-036	3/0 AWG – 477 kcmil	0.502 – 0.883	12.8 – 22.4	3	19.1	8.7	65.4	166.1
CSR-1108L-024***	336.4 kcmil – 795 kcmil	0.684 – 1.108	17.4 – 28.1	2	14.4	6.5	43.8	111.3
CSR-1108-040	336.4 kcmil – 795 kcmil	0.684 – 1.108	17.4 – 28.1	4	27	12.2	78.8	200.2

ClampStar Part Number	Conductor Diameter Range			Number of Keepers Per Side	Average Weight		Overall Length
ClampStar Part Number	Conductor Range	Inches	mm	Number of Keepers Per Side	Pounds	Kg	Inches	cm
Rigid Frame
CSR-1140S-048	477 kcmil – 795 kcmil	0.814 – 1.140	20.7 – 29.0	16	31.9	14.5	92	233.7
CSR-1140FT-048	477 kcmil – 795 kcmil	0.814 – 1.140	20.7 – 29.0	20	36.3	16.5	100	254.0
CSR-1386S-060	605.0 kcmil – 1351.5 kcmil	1.051 – 1.386	26.7 – 35.2	16	33.8	15.3	104	264.2
CSR-1386H-060	605.0 kcmil – 1351.5 kcmil	1.051 – 1.386	26.7 – 35.2	20	38.7	17.6	112	284.5
CSR-1386FT-060	605.0 kcmil – 1351.5 kcmil	1.051 – 1.386	26.7 – 35.2	20	38.4	17.4	112	284.5
CSR-1631S-060	1272 kcmil – 1780 kcmil	1.345 – 1.631	34.2 – 41.4	20	37.9	17.2	112	284.5
CSR-1631H-060	1272 kcmil – 1780 kcmil	1.345 – 1.631	34.2 – 41.4	26	53	24.04	124	315.0
CSR-1631FT-060	1272 kcmil – 1780 kcmil	1.345 – 1.631	34.2 – 41.4	20	37.9	17.2	112	284.5
CSR-1912S-060	1351.5 kcmil – 2515 kcmil	1.524 – 1.912	38.7 – 48.6	20	50	22.7	112	284.5
CSR-1912H-060	1351.5 kcmil – 2515 kcmil	1.524 – 1.912	38.7 – 48.6	26	58.0	26.3	124	315.0
CSR-1912FT-060	1351.5 kcmil – 2515 kcmil	1.524 – 1.912	38.7 – 48.6	20	50.3	22.8	112	284.5

ClampStar Part Number	Conductor Diameter Range			Number of Keepers Per Side	Average Weight		Overall Length
ClampStar Part Number	Conductor Range	Inches	mm	Number of Keepers Per Side	Pounds	Kg	Inches	cm
CRU ♦
CRU-0642-014	2/0 AWG – 266.8 kcmil	0.349 – 0.642	8.9 – 16.3	3	3	1.4	14.4	36.6
CRU-0883-015	3/0 AWG – 477 kcmil	0.502 – 0.883	12.8– 22.4	3	7	3.2	14.7	37.3
CRU-1108-019	336.4 kcmil – 795 kcmil	0.684 – 1.108	17.4 – 28.1	4	12	5.4	19.4	49.3

Corona Shields
CSC-0883-230	Corona shields are generally required for applications above 138 kv. The appropriate shielding is obtained by combining the ClampStar unit number with the highest anticipated system voltage. Example: CSC-1108-230 designates shielding for corona free performance of CRU/CSF/CSR-1108 units installed on a 230 kv system. **Same shield is used for 230 and 345 KV applications
CSC-0883-345 **
CSC-1108-345 **
CSC-XXXX-500

ClampStar Part Number	Conductor Diameter Range			Number of Keepers Per Side	Average Weight		Overall Length
ClampStar Part Number	Conductor Range	Inches	mm	Number of Keepers Per Side	Pounds	Kg	Inches	cm
CSS-1140S-DE-060-X-X	477 kcmil – 795 kcmil	0.814 – 1.140	20.7 – 29.0	16/8	TBD	TBD	95	241.3
CSS-1140FT-DE-060-X-X	477 kcmil – 795 kcmil	0.814 – 1.140	20.7 – 29.0	20/8	43.8	19.9	99	251.5
CSS-1386S-DE-060-X-X	605.0 kcmil – 1351.5 kcmil	1.051 – 1.386	26.7 – 35.2	16/10	44.4	20.1	97	246.4
CSS-1386FT-DE-060-X-X	605.0 kcmil – 1351.5 kcmil	1.051 – 1.386	26.7 – 35.2	20/10	46.2	21.0	101	256.5
CSS-1631S-DE-060-X-X	1272 kcmil – 1780 kcmil	1.345 – 1.631	34.2 – 41.4	20/12	44	20.0	103	261.6
CSS-1631FT-DE-060-X-X	1272 kcmil – 1780 kcmil	1.345 – 1.631	34.2 – 41.4	20/12	46.5	21.1	103	261.6
CSS-1912S-DE-066-X	1351.5 kcmil – 2515 kcmil	1.524 – 1.912	38.7 – 48.6	20/12	62	28.1	109	276.9
CSS-1912FT-DE-066-X	1351.5 kcmil – 2515 kcmil	1.524 – 1.912	38.7 – 48.6	20/12	62	28.1	109	276.9

shunt

Explore

Contact

INSTALLATION KIT
Part Number	Description
Installation Kit-375	3/8″ eye bolt
Installation Kit-500	1/2″ eye bolt
Installation Kit-EXT-625	5/8″ cable extension for OPGW/OHSW

TORQUE NUTS
Part Number	Description	Wrenches
TNHH-500	Zinc housing over HDG Steel nut 1/2-13 thread, 40 ft-lb nominal	Install with 3/4″ socket Remove with 15/16″ deep-well socket
TNHH-500-55	Zinc housing over HDG Steel nut 1/2-13 thread, 55 ft-lb nominal
TNHH-500-SS	Zinc housing over Stainless Steel nut 1/2-13 thread, 40 ft-lb nominal
TNHH-500-BZ	Zinc housing over Stainless Steel nut 1/2-13 thread, 40 ft-lb nominal
TNHH-375	Zinc housing over HDG Steel nut 3/8-16 thread, 22 ft-lb nominal	Install with 9/16″ socket Remove with 3/4″ deep-well socket

Spline Bits
Part Number	Description
Installation Kit-T45	T45 Torque Spline Bit
Installation Kit-T60	T60 Torque Spline Bit